LG Alltel Tritan Tips: Adding Custom Ringtones
Questions: how to add LG Alltel Tritan Custome Ringtones,adding custom ringtones to LG ALLtel Tritan.
Answers, East steps to go, here you follow the guides will help you to adding custome ringtones or personalize your ringtones make by yourself.
Installing Drivers
1) Go to http://www.colordrives.net/LG7000%20Driver.zip and download this driver. It is not necessary to install the whole thing.
2) Open with winrar or winzip.
3) Drag the folder that matches your operating system to your desk top.
4) Plug your data cable into your phone and then into the usb port on your computer.
5) Choose “USB Mass Storage”
This will set up your SD Card for use with your phone.
When finished touch exit on your phone.
6) Disconnect USB cable from PC and then reconnect.
7) On your phone choose the option “USB Modem”
A window should come up asking you for a driver. (I assume here that you know how to install a driver onto your pc *crosses fingers*)
Point it to the folder containing the drivers that you placed on your desktop.
9) Do this several times until it tells you that your device has been installed and is working properly. Double check that everything is working properly by going into your system properties and making sure that nothing has an ! next to it.
Installing Bitpim
Next you will need a small program called Bitpim
1) Go here to download. http://sourceforge.net/projects/bitpim/files/bitpim-tests/1.0.7.20090805/bitpim-1.0.7.20090805-setup.exe/download
2) Install the program.
3) Start Bitpim
A window should come up that says “Found other CDMA phone” Make note of the COM# (depending on your pc set up this can vary)
4) Click Edit on the top tool bar
5) Click Settings
6) Click the Phone Wizard button
7) Choose Alltel – LG – VX9700 (Dare) then Next
Click the COM# that it told you in step #3 above
9) Click the Detect Phone button (it will probably fail ..but that is ok)
10) Click Finish
This will take you back to the main screen of BitPim
11) Click View on the top tool bar, then click View File System
12) You will notice that this puts a File System Icon on the left column at the bottom
13) Click the File System Icon
14) In the second column over you will see a file with a + next to it, Click the + (this expands the folder) It SHOULD say retrieving and then a large list of folders will appear. This is the contents of your phone. Tamper with this at your own risk.
15) Click on the folder named dload
16) Right click “mysound.dat”
17) Choose to save this file to your desktop
18) Then delete the file from the dload folder in Bitpim
19) Expand Brew
20) Expand Media
21) Expand lk
22) Click on the ms folder
23) In the right most column you will see all of your ringtones that are on your phone.
24) Drag any mp3 ringtone that you have to this list and Drop (you should see it appear in the list) *note midis and wavs may work .. Im not sure because I haven’t tested this
25) Exit Bitpim
26) Unplug your phone
27) POWER DOWN your phone and then POWER BACK UP.
28) Your custom ringtones should now be listed with the rest of the ringtones on your phone.
After completing this process the next time you do it begin at step #13, this is correct HOWEVER you do NOT need to preform steps #15-#18 again (just skip directly to step #19).
Read more about:
Related posts:
Leave a Comment
You must be logged in to post a comment.
